SCSI-3194UW

A 32 bit PCI Local-Bus Ultra Wide SCSI Host Adapters.

3194uw_300.jpg (12808 bytes)
   SCSI-3194UW is single-chip 32 bit PCI Bus Plug and Play Ultra Wide SCSI Host Adapter to be used in the PC which has a free PCI bus slot. It is designed has a low-cost high performance SCSI host adapter with BIOS for SCSI devices such as Hard Disk Drive, CD-ROM, MO, WORM, CD-R and flat-bed scanner, tape drive etc. With abundent drivers supporting for ASPI and SCAM, SCSI-3194UW can work under major operating systems such as MS-DOS, Win 3.1, win95, Win NT, OS/2 Warp, Novell Netware, SCO Unix, SCO UNIXWARE etc. SCSI-3194UW can connect up to 15 SCSI devices through internal 50 or 68 pin headers or an external 68-pin high density connector. With embedded high-speed 64-byte FIFO buffers that allow concurrent data transfer on host bus and SCSI bus. It can sustain an asychronous transfer rate to 10 MB/Sec. And burst up to 40 MB/Sec. at synchronous mode.

 
Features
  • Low-cost high performance single-chip Ultra SCSI Host Adapter.
  • PCI 2.1 Compliant.
  • Support full 32 bit PCI Bus Master, with zero wait state mode can burst data up to 132 MB/Sec.(@33MHz)
  • Built in 1 Mbits EPROM/Flash ROM(option).
  • Supports Command Tag Queueing, Sync./Asynch.Transfers, Disconnects and Reconnects.
  • Supports Plug and Play.
  • Supports EEPROM.
  • CE and FCC Class B Certified.

 
Specifications
Bus PCI Local Bus 32 bit DMA Mode SCSI Bus Single-ended
SCSI Protocol SCSI-I, SCSI-II, SCSI-III SCSI Terminator Auto and Programmable
SCSI Transfer rate 10MB/Sec. Asynchronous, 40MB/Sec. Synchronous Operating Temperature 0-55 Deg. C
Max SCIS devices connection 15 Relative Humidity 10-95% non-condensing
Internal SCSI connector 50 pin header and 68 pin high-density connector External SCSI connector 68-pin High Density.
Certification CE and FCC class B. PCB Dimension 97.0 X 158.0 mm

 
Driver Set
MS-DOS / Win 3.1 Win 95
Win NT 3.5X/4.X OS/2 Warp.
SCO UNIX 3.2V 4.2 Novell Netware 3.X/4.X
UNIXWARE 2.X OS/2 Warp.